))
Building a Raspberry Pi + ESP32 Drone: My First Steps Into Robotics
Manage episode 507895444 series 3474375
A tartalmat a HackerNoon biztosítja. Az összes podcast-tartalmat, beleértve az epizódokat, grafikákat és podcast-leírásokat, közvetlenül a HackerNoon vagy a podcast platform partnere tölti fel és biztosítja. Ha úgy gondolja, hogy valaki az Ön engedélye nélkül használja fel a szerzői joggal védett művét, kövesse az itt leírt folyamatot https://hu.player.fm/legal.
This story was originally published on HackerNoon at: https://hackernoon.com/building-a-raspberry-pi-esp32-drone-my-first-steps-into-robotics.
A journey from a web developer to a drone maker, with all of the problems and solutions that come with making a drone using a Raspberry Pi and ESP32.
Check more stories related to futurism at: https://hackernoon.com/c/futurism. You can also check exclusive content about #robotics, #drones, #c++, #kotlin, #raspberry-pi, #esp32, #android-development, #hackernoon-top-story, and more.
This story was written by: @tohntobshi. Learn more about this writer by checking @tohntobshi's about page, and for more stories, please visit hackernoon.com.
Anton wrote about his first steps into robotics and particularly about his Raspberry Pi + ESP32 drone. Anton designed parts in Blender and then printed them in 3D on a cheap 3D printer. The drone is controlled by an app, where users can monitor and monitor the drone with an analog-like app. Anton also made a video about it and attached it at the end of the article to the article.
154 epizódok
Megosztás
