))
Building a Entry Table With Walnut Cuffs
Manage episode 440586298 series 3589219
A tartalmat a Benham Design Concepts biztosítja. Az összes podcast-tartalmat, beleértve az epizódokat, grafikákat és podcast-leírásokat, közvetlenül a Benham Design Concepts vagy a podcast platform partnere tölti fel és biztosítja. Ha úgy gondolja, hogy valaki az Ön engedélye nélkül használja fel a szerzői joggal védett művét, kövesse az itt leírt folyamatot https://hu.player.fm/legal.
In this episode, I build a custom entry table with walnut cuffs. The main table is made from cherry, and the feet are adorned with decorative walnut cuffs.
This custom table was designed and handcrafted for a Colorado Springs client.
Summary
Sugar Table and Decorative Walnut Cuffs
Brian discussed the process of building a Shaker table with decorative walnut cuffs on the feet. He explained how he used a miter gauge set up at an angle and the blade slightly tipped to achieve the desired angle. He also mentioned cleaning up discrepancies with a shoulder plane and a chisel. For the cuffs, he used resawed thin veneers from walnut and glued three sides before using a hand plane to flush them up and carefully installing the fourth piece. He then moved on to the drawers, cutting dados for the bottom and planning the dovetails so that the dados run through the tail, concealing them inside the drawer. Any discrepancies were cleaned up with a hand plane.
10 epizódok
Megosztás
